Owner manual

7-54 IM MX190-01E
Member Data Manipulation
getStatus Gets the data status.
getAlarm Gets the alarm value.
setStatus Set the data status.
setAlarm Sets the alarm value.
Output Format Manipulation
setLine Stores the measured data from the string.
setByte Stores the measured data from the byte array.
Association
getClassDARWINChInfo Gets the association with the channel information data.
setClassDARWINChInfo Sets the association with the channel information data.
Utilities
getAlarmName Gets the name of the alarm type.
toAlarmType Converts the string into an alarm type.
getMaxLenAlarmName Gets the maximum length of the alarm type name.
Operator
operator= Executes substitution.
• Overridden Members
Member Data Manipulation
initialize Initializes the data member.
Utilities
isObject Checks an object.
Inherited Members
See CDAQDataInfo
getClassChInfo getDoubleValue getStringValue getValue
setClassChInfo setValue toDoubleValue toStringValue
Protected Members
Data Members
m_dataStatus Field for storing the data status.
m_alarm Field for storing the presence or absence of the alarm.
Inherited Members
See CDAQDataInfo
m_pChInfo m_value
7.4 Details of the DARWIN Class