Owner manual

7-14 IM MX190-01E
getChDataByBinary Gets the measured data in binary format.
talkOperationData Declares the retrieval of the setup data of operation mode.
talkSetupData Declares the retrieval of the setup data of setup mode.
talkCalibrationData Declares the retrieval of the setup data of A/D calibration
mode.
getSetDataByLine Gets the setup data.
getReportStatus Gets the report status.
Setup Functions
setSKIP Sets SKIP (not used).
setVOLT Sets DC voltage input.
setTC Sets thermocouple input.
setRTD Sets RTD input.
setDI Sets contact input (DI).
setDELTA Sets difference computation between channels.
setRRJC Sets remote RJC.
setScallingUnit Sets the scaling unit.
setAlarm Sets the alarm value.
setMA Sets the DC current range.
setSTRAIN Sets the strain input.
setPULSE Sets the pulse input.
setPOWER Sets the power monitor.
• Overridden Members
Communication Functions
open Establishes connection.
Data Retrieval Functions
getData Gets the measured data.
getChannel Gets the channel information data.
Utilities
isObject Checks an object
• Inherited Members
See CDAQHandler.
close getErrorMessage getMaxLenErrorMessage
getRevisionAPIgetVersionAPIreceiveLine sendLine setTimeOut
7.4 Details of the DARWIN Class