Owner manual

7-13
IM MX190-01E
DARWIN - Visual C++ -
7
7.4 Details of the DARWIN Class
The classes are listed in alphabetical order by the class name.
CDAQDARWIN Class
CDAQHandler
CDAQDARWIN
This class is derived from the CDAQHandler class.It provides functions common to
the DARWIN series such as communications, data retrieval, and measurement
range setting.
Public Members
Construct/Destruct
CDAQDARWIN Constructs an object.
~CDAQDARWIN Destructs an object.
Communication Functions
runCommand Sends the message and receives the response.
getStatusByte Gets the status byte.
sendTrigger Sends a trigger.
receiveByte Receives the binary data by lines.
Control Functions
setDateTime Sets the date/time.
transMode Switches the setting mode.
initSystem Initializes the system.
establish Establishes setup mode.
compute Starts/stops computation.
reporting Starts/stops reporting.
Data Retrieval Functions
getSystemConfig Gets the system configuration data.
talkChInfo Declares the retrieval of the channel information data.
getChInfo Gets the channel information data.
talkDataByASCII Declares the retrieval of the measured data in ASCII
format.
getChDataByASCII Gets the measured data in ASCII format.
talkDataByBinary Declares the retrieval of the measured data in binary
format.