Owner manual

6-16 IM MX190-01E
6.3 MX100 Setting Item Numbers
These numbers are added to each item of the setup data structure to unify them.
When sending the setup data, the numbers show the detected location when an
error occurs during a consistency check.
A definition file is available.
List of Setting Items
Each item field of the MXConfigData structure is numbered.
Definitions are given in the files below. Load the definitions as needed.
• DAQMXItems.h
•DAQMXItems.bas
• DAQMXItems.txt
• DAQMXItems.cs
• DAQMXItems.vb
Fixed descriptions such as channel number items that have no particular meaning
when read out are not numbered.
If an error occurs, check the values of settings.
The character string is used if the value of the setting item number is converted to
an item name. It is for the extension API only.
In Visual C#, it is defined as a constant of the DAQMXItems class.
Systems
Mnemonic Value Location Description Error String
DAQMX_ITEM_NONE -1 - Unknown - -
DAQMX_ITEM_NETHOST 0 aNetInfo. Host name - Host Name
aHost
DAQMX_ITEM_NETADDRESS 1 aNetInfo. IP Address - Address
aAddress
DAQMX_ITEM_NETPORT 2 aNetInfo. Port number - Port No
aPort
DAQMX_ITEM_NETSUBMASK 3 aNetInfo. Subnet - Submask
aSubMask mask
DAQMX_ITEM_NETGATEWAY 4 aNetInfo. GATEWAY - Gateway
aGateway Address
DAQMX_ITEM_UNITTYPE 5 aSystemInfo. Unit type - Unit Type
aUnit.aType
DAQMX_ITEM_UNITSTYLE 6 aSystemInfo. Style - Unit Style
aUnit.aStyle
DAQMX_ITEM_UNITNO 7 aSystemInfo. Unit Number Value is Unit No
aUnit.aNo out-of-range
DAQMX_ITEM_UNITTEMP 8 aSystemInfo. Temperature unit type Value is Temperature
aUnit.aTempUnit out-of-range Unit