Owner manual

4-2 IM MX190-01E
Note
If the auto control of the FIFO is enabled, the FIFO is automatically resumed when the
FIFO is stopped due to an execution of a function.
Functionality
Collective Setup
Function FIFO Function
Set the setup data (system setup data). Stop setSystemConfigMX
Configure the setup data (channel setup data). Stop setChConfigMX
Set the DO (Digital Output) data collectively. Continue setDODataMX
Transmit AO/PWM data Continue setAOPWMDataMX
Send transmission Output Data Continue setTransmitMX
For a description of the FIFO column in the table, see the explanation given in
“Other Controls” on the previous page. Setup data cannot be handled collectively.
If an invalid data error occurs, the last detected item is saved as a setting item
number. It can be retrieved with a utility.
Individual Setup
Function FIFO Function
Set initial balance data Stop setBalanceMX
Set output channel data Stop setOutputMX
Initial balance data Execute Stop runBalanceMX
Reset Stop resetBalanceMX
Setup Change
Function FIFO Function
Range SKIP (not used) Stop setSKIPMX
Settings DC voltage input Stop setVOLTMX
Thermocouple input Stop setTCMX
RTD input Stop setRTDMX
Digital input (DI) Stop setDIMX
Difference computation between channels Stop setDELTAMX
Remote RJC Stop setRRJCMX
Resistance Stop setRESMX
Strain Stop setSTRAINMX
AO Stop setAOMX
PWM Stop setPWMMX
Pulse Stop setPULSEMX
Communication Stop setCOMMX
Set the unit name of the channel. Stop setScallingUnitMX
Set the channel tag. Stop setTagMX
Set a comment for the channel. Stop setCommentMX
Set the alarm. Stop setAlarmMX
4.1 Functions and Their Functionalities - MX100/Visual Basic -