Owner manual

2-132 IM MX190-01E
setRES Sets the resistance range.
setSTRAIN Sets the strain range.
setAO Sets the AO range.
setPWM Sets the PWM range.
setCOM Specify the communication range.
setPULSE Specify the pulse range.
Check
isCorrect Checks the validity.
Operator
operator= Executes substitution.
Utilities
getItemError Gets the number of the parameter on which an
error was detected.
isObject Checks an object.
getSpanPoint Gets the decimal point position of the channel.
getRangePoint Gets the decimal point position of the range type.
getChName Gets the channel name.
setChKind Sets the channel type.
Protected Members
Data Members
m_cMXSysInfo Field for storing the system configuration data.
m_cMXStatus Field for storing the status data.
m_cMXNetInfo Field for storing the network information data.
m_cMXChConfigData Field for storing the channel setup data.
m_cMXBalanceData Field for storing the initial balance data.
m_cMXOutputData Field for storing the output channel data.
m_nItemError Field for storing the setting item number.
Private Members
None.
2.5 Details of the MX100 Class