Owner manual

2-107
IM MX190-01E
MX100 -Visual C++
2
CDAQMXChConfigData class
This class stores the channel setup data of all the channels of the MX100.
It is a wrapper class of the MXChConfigData structure.
This class can be used as an interface for storing setup data for all channels when
retrieving setup data.
This class is a group of all channels of the CDAQMXChConfig class.
It implements any processing required for the between-channel association
information.
Public Members
Construct/Destruct
CDAQMXChConfigData Constructs an object.
~CDAQMXChConfigData Destructs an object.
Structure Manipulation
getMXChConfigData Gets the data in a structure.
setMXChConfigData Sets the data in a structure.
initMXChConfigData Initializes the data in a structure.
setMXChConfig Sets the data in a structure for each channel.
Member Data Manipulation
initialize Initializes the data member.
getClassMXChConfig Gets the data for each channel.
Range Settings
setRRJC Sets remote RJC.
changeRange Changes the range using the temperature unit type.
Check
isCorrect Checks the validity.
Utilities
getItemError Gets the number of the parameter on which an
error was detected.
isObject Checks an object.
Operator
operator= Executes substitution.
2.5 Details of the MX100 Class