Owner manual

2-106 IM MX190-01E
CDAQMXChConfig::setTC
Syntax
void setTC(int iRangeTC, int iTempUnit = DAQMX_TEMPUNIT_C);
Parameters
iRangeTC Specify the range type of the thermocouple input.
iTempUnit Specify the temperature unit type.
Description
Sets the specified range.
Makes the channel status valid. The settings are set to the default values of the
specified range type.
The channel type is set to the value of AI.
Any specification other than the TC range is ignored.
The span, scale, decimal point position, unit name, and reference channel are set to
the default values.
The alarm setting is initialized (cleared).
Reference
setAlarm setPoint setRefChNo setScalling setSpan setType
setUnit setValid
CDAQMXChConfig::setVOLT
Syntax
void setVOLT(int iRangeVOLT);
Parameters
iRangeVOLT Specify the range type of the DC voltage input.
Description
Sets the specified range.
Makes the channel status valid. The settings are set to the default values of the
specified range type.
The channel type is set to the value of AI.
Any specification other than the DC voltage range is ignored.
The span, scale, decimal point position, unit name, and reference channel are set to
the default values.
The alarm setting is initialized (cleared).
Reference
setAlarm setPoint setRefChNo setScalling setSpan setType
setUnit setValid
2.5 Details of the MX100 Class