Owner manual

23-3
IM MX190-01E
DARWIN for Extended API - C# -
23
List of Data Retrieval Functions
Function Command Function
Measured Meas ch TS, FM DAQDA100. measInstChDA100
Data (Inst val) Comp ch TS, FM DAQDA100. mathInstChDA100
Channel info data Meas ch TS, LF DAQDA100. measInfoChDA100
Comp ch TS, LF DAQDA100. mathInfoChDA100
System configuration data TS,CF CDAQDA100. updateSystemConfigDA100
Report status TS,RF CDAQDA100. updateReportStatusDA100
Setup data
Declare Op Sngl spec TS, LF CDAQDA100. talkOperationChDataDA100
mode Specify rng TS, LF CDAQDA100. talkOperationDataDA100
Setup Sngl spec TS, LF CDAQDA100. talkSetupChDataDA100
Mode Specify rng TS, LF CDAQDA100. talkSetupDataDA100
Calibrate Sngl spec TS, LF CDAQDA100. talkCalibrationChDataDA100
Mode Specify rng TS, LF CDAQDA100. talkCalibrationDataDA100
Get data by lines - CDAQDA100. getSetDataByLineDA100
Setup data is not stored, so it is retrieved in the same order as mentioned in
sections 7.2 and 7.3. In this case, status is not updated.
Channel information data and system configuration data are stored internally, but
the user can explicitly perform acquisition.
The report status is stored internally, but is not updated unless the user explicitly
acquires it.
23.1 Functions and Their Functionalities - DARWIN/C# -