Owner manual

21-2 IM MX190-01E
Control Functions
Function Command Function
Switch operation mode DS switchModeDA100
Retrieve code type - switchCodeDA100
switch (binary/ASCII code)
Reconfigure RS reconstructDA100
Initialize settings RC initSetValueDA100
Reset alarms AR ackAlarmDA100
Set date/time (current time) SD setDateTimeNowDA100
Calculation start/stop EX switchComputeDA100
Report start/stop DR switchReportDA100
Establish setup mode XE establishDA100
Generally, the status is updated at the end of the process.
Status is not updated when establishing the setup mode.
Setting (Operation Mode) Functions
Function Command Function
Range SKIP (not used) SR setRangeDA100
DC voltage input SR setRangeDA100
Thermocouple input SR SetRangeDA100
RTD input SR SetRangeDA100
Contact input (DI) SR SetRangeDA100
DC current SR SetRangeDA100
Strain SR SetRangeDA100
Pulse SR SetRangeDA100
Power monitor SR SetRangeDA100
Difference computation SR setChDELTADA100
between channels
Remote RJC SR setChRRJCDA100
Unit name SN setChUnitDA100
Alarm SA setChAlarmDA100
Becomes the channel unit setting.
The status is updated after the setting is entered.
21.1 Correspondence between the Functions and Class/Member Functions - DARWIN/Visual Basic -