Owner manual

19-17
IM MX190-01E
19
DARWIN for Extended API - Visual C++
Setup Functions
setRange Sets the range.
setChDELTA Sets difference computation between channels.
setChRRJC Sets remote RJC.
setChUnit Sets the unit name.
setChAlarm Sets the alarm value.
Data Retrieval Functions
measInstCh Gets the measured data of the measurement channel.
mathInstCh Gets the measured data of the computation channel.
measInfoCh Gets the channel information data of the measurement
channel.
mathInfoCh Gets the channel information data of the computation
channel.
updateSystemConfig Updates the system configuration data.
updateReportStatus Updates the report status.
talkOperationChData Declares the retrieval of the setup data of operation mode
on independent channels.
talkSetupChData Declares the retrieval of the setup data of basic setting
mode on independent channels.
talkCalibrationChData Declares the retrieval of the setup data of calibration mode
on independent channels.
Member Data Manipulation
getClassSysInfo Gets the system configuration data.
getClassDataBuffer Gets the type information for each channel.
getCode Gets the retrieve code type.
getByte Gets the status byte.
getReport Gets the report status.
• Overridden Members
Communication Functions
open Establishes connection.
Data Retrieval Functions
getData Gets the measured data.
getChannel Gets the channel information data.
Control Functions
setDateTime Sets the date/time.
19.6 Details of the DARWIN Class