Manual

IM 11M10B01-01E

INTRODUCTION

n Safety,Protection,andModicationoftheProduct

• In order to protect the system controlled by the product and the product itself and ensure safe

operation, observe the safety precautions described in this user’s manual. We assume no liabil-

ity for safety if users fail to observe these instructions when operating the product.

• Ifthisinstrumentisusedinamannernotspeciedinthisuser’smanual,theprotectionprovided

by this instrument may be impaired.

• If any protection or safety circuit is required for the system controlled by the product or for the

product itself, prepare it separately.

• Be sure to use the spare parts approved by Yokogawa Electric Corporation (hereafter simply

referred to as YOKOGAWA) when replacing parts or consumables.

• Modicationoftheproductisstrictlyprohibited.

• The following symbols are used in the product and user’s manual to indicate that there are pre-

cautions for safety:

n Notes on Handling User’s Manuals

• Please hand over the user’s manuals to your end users so that they can keep the user’s manu-

als on hand for convenient reference.

• Please read the information thoroughly before using the product.

• The purpose of these user’s manuals is not to warrant that the product is well suited to any par-

ticular purpose but rather to describe the functional details of the product.

• No part of the user’s manuals may be transferred or reproduced without prior written consent

from YOKOGAWA.

• YOKOGAWA reserves the right to make improvements in the user’s manuals and product at any

time, without notice or obligation.

• Ifyouhaveanyquestions,oryoundmistakesoromissionsintheuser’smanuals,pleasecon-

tact our sales representative or your local distributor.

n Warning and Disclaimer

The product is provided on an “as is” basis. YOKOGAWA shall have neither liability nor responsibil-

ity to any person or entity with respect to any direct or indirect loss or damage arising from using the

product or any defect of the product that YOKOGAWA can not predict in advance.

Media No. IM 11M10B01-01E 3rd Edition : May. 2011 (YK)