User Manual
IM 11M13A01-04E
8-9
8. Detailed Data Setting
8.4.4 Default Values
When the analyzer is delivered, or if data are initialized, the default alarm set values are
as shown in Table 8.8.
Table 8.8 Alarm Setting Default Values
Set item Set value
High-high-limit alarm setpoint 100% O
2
High-high limit alarm 100% O
2
Low-limit alarm 0% O
2
Low-low-limit alarm setpoint 0% O
2
Hysteresis 0.1% O
2
Delayed time 3 seconds
High-high-limit alarm detection Not detected
High-limit alarm detection Not detected
Low-low-limit alarm detection Not detected
Low-low-limit alarm detection Not detected
T8.8E.EPS