User Manual

IM 11M13A01-04E

3-1

3. Installation

This chapter describes installation of the following equipment:

3.1 Model ZR202S Zirconia Oxygen Analyzer

3.2 Model ZA8F Flow Setting Unit

3.3 Case Assembly for Calibration-gas Cylinder (E7044KF)

3.1 Installation of the Zirconia Oxygen Analyzer

3.1.1 Area

The following should be taken into consideration when installing the probe:

(1) Easy and safe access to the probe for checking and maintenance work.

(2) Ambient temperature of not more than 55˚C, and the terminal box should not be

affected by radiant heat.

(3) A clean environment without any corrosive gases.

(4) No vibration.

(5) The measurement gas satisfies the specifications described in Chapter 2.

(6) No measured gas-pressure fluctuations.

CAUTION

• The ambient temperature of ZR202S Integrated type Explosion Zirconia Oxygen

Analyzer should be between 220˚C and 55˚C.