User Manual

IM 11M13A01-04E
10-2
Table 10.1 Parameter Codes for Detailed Operation Data
Note: The blank parameter codes above are not used in the oxygen analyzer.
T10.1.EPS
Parameter Item Engineering unit Code Item Engineering unit
code
A00 Selection of display items
0: Oxygen concentration A50 Span-gas ratio 0
%
1: Oxygen analyzer (0.0) A51
Span-gas ratio 1 %
2: Oxygen analyzer (0.0) A52 Span-gas ratio 2
%
3: Analog output selected A53
Span-gas ratio 3 %
A01 Oxygen concentration % O
2
A54 Span-gas ratio 4 %
A02 A55
Span-gas ratio 5 %
A03 A56
Span-gas ratio 6 %
A04 A57
Span-gas ratio 7 %
A05 A58
Span-gas ratio 8 %
A06 Air ratio A59
Span-gas ratio 9 %
A07 Cell temperature
8C A60 Zero-gas ratio 0 %
A08 Cold-junction temperature
8C A61 Zero-gas ratio 1 %
A09 Meas. gas temperature 8C A62 Zero-gas ratio 2
%
A10 Amount of water vapor in
% A63 Zero-gas ratio 3 %
exhaust gas
A11 Cell voltage mV A64 Zero-gas ratio 4
%
A12 TC voltage mV A65 Zero-gas ratio 5
%
A15 Cold-junction voltage mV A66
Zero-gas ratio 6 %
A16 Output current mA A67
Zero-gas ratio 7 %
A20 Cell response time Seconds A68 Zero-gas ratio 8
%
A21 Cell internal resistance V A69
Zero-gas ratio 9 %
A22 Cell robustness A70 Calibration history 0 YY.MM.DD/HH.MM
A23 Heater on-time ratio
% A71 Calibration history 1 YY.MM.DD/HH.MM
A24 Oxygen concentration (with % O
2
A72 Calibration history 2 YY.MM.DD/HH.MM
time constant)
A25 A73 Calibration history 3 YY.MM.DD/HH.MM
A26 A74 Calibration history 4 YY.MM.DD/HH.MM
A30 Max. oxygen concentration % O
2
A75 Calibration history 5 YY.MM.DD/HH.MM
A31 Occurrence of maximum YY.MM.DD/HH.MM A76 Calibration history 6 YY.MM.DD/HH.MM
oxygen concentration
A32 Min. oxygen concentration % O
2
A77 Calibration history 7 YY.MM.DD/HH.MM
A33 Occurrence of minimum YY.MM.DD/HH.MM A78
Calibration history 8 YY.MM.DD/HH.MM
oxygen concentration
A34 Average oxygen concentration % O
2
A79 Calibration history 9 YY.MM.DD/HH.MM
A35 A80
Time YY.MM.DD/HH.MM
A36 A90 Software revision
A37
A38
A39
A40
A41
A42
A43
A44