Owner manual
Table Of Contents
- Introduction
- CONTENTS
- 1. Overview
- 2. Specifications
- 2.1 General Specifications
- 2.2 General use Separate type Detector and Related Equipment
- 2.3 Separate type Detector for High Temperature and Related Equipment
- 2.4 ZR402G Separate type Converter
- 2.5 ZA8F Flow Setting Unit and ZR40H Automatic Calibration Unit
- 2.6 ZO21S Standard Gas Unit
- 2.7 Other Equipments
- 2.7.1 Dust Filter for the Detector (K9471UA)
- 2.7.2 Dust Guard Protector (K9471UC)
- 2.7.3 Ejector Assembly for High Temperature (E7046EC, E7046EN)
- 2.7.4 Stop Valve (L9852CB, G7016XH)
- 2.7.5 Check Valve (K9292DN, K9292DS)
- 2.7.6 Air Set
- 2.7.7 Zero Gas Cylinder (G7001ZC)
- 2.7.8 Cylinder Pressure Reducing Valve (G7013XF, G7014XF)
- 2.7.9 Case Assembly for Calibration Gas Cylinder (E7044KF)
- 2.7.10 ZR22A Heater Assembly
- 3. Installation
- 3.1 Installation of General-purpose Detector
- 3.2 Installation of High Temperature Detector (ZR22G-015)
- 3.3 Installation of the ZR402G Converter
- 3.4 Installation of ZA8F Flow Setting Unit
- 3.5 Installation of ZR40H Automatic Calibration Unit
- 3.6 Installation of the Case Assembly(E7044KF)
- 3.7 Insulation Resistance Test
- 4. Piping
- 5. Wiring
- 6. Components
- 7. Startup
- 7.1 Checking Piping and Wiring Connections
- 7.2 Checking Valve Setup
- 7.3 Supplying Power to the Converter
- 7.4 Touchpanel Switch Operations
- 7.5 Confirmation of Converter Type Setting
- 7.6 Confirmation of Detector Type Setting
- 7.7 Selection of Sample Gas
- 7.8 Output Range Setting
- 7.9 Setting Display Item
- 7.10 Checking Current Loop
- 7.11 Checking Contact I/O
- 7.12 Calibration
- 8. Detailed Data Setting
- 9. Calibration
- 10. Other Functions
- 11. Inspection and Maintenance
- 12. Troubleshooting
- Customer Maintenance Parts List CMPL 11M12A01-02E
- Customer Maintenance Parts List CMPL 11M12C01-01E
- Customer Maintenance Parts List CMPL 11M12A01-11E
- Customer Maintenance Parts List CMPL 11M03B01-10E
- Customer Maintenance Parts List CMPL 11M03B01-05E
- Customer Maintenance Parts List CMPL 11M03D01-01E
- Revision Information
Customer
Maintenance
Parts List
All Rights Reserved, Copyright © 2000, Yokogawa Electric Corporation.
Subject to change without notice.
Model ZO21P-H
Zirconia Oxygen Analyzer
High Temperature Probe Adapter
CMPL 11M03B01-10E
1st Edition : Dec. 2000 (YK)
7th Edition : Feb. 2011 (YK)
1
2
3
4
5,6
7 8,9,10
11
ZR22G
Item Part No. Qty Description
1 E7046AL
E7046BB
E7046AP
E7046AQ
1
1
1
1
Probe (SiC, L=1.0m)
Probe (SiC, L=1.5m)
Probe (SUS, L=1.0m)
Probe (SUS, L=1.5m)
2 E7046AD
E7046CB
——
——
——
——
——
——
——
——
1
1
1
1
1
1
1
1
1
1
Probe Adaptor (for JIS 5K-50-FF)
Probe adapter (for ANSI CLASS150-4-RF)
Probe adapter (for DIN PN10-DN50-A)
Probe adapter (for JIS 10K-100-FF)
Probe adapter (for JIS 10K-80-FF)
Probe adapter (for JIS 10K-65-FF)
Probe adapter (for ANSI CLASS150-3-RF)
Probe adapter (for ANSI CLASS150-2 1/2-RF)
Probe adapter (for JPI CLASS150-4-RF)
Probe adapter (for JPI CLASS150-3-RF)
3 E7046FQ 1 Gasket
4
5
6
7
8
E7046FN
Y9825NU
Y9800WU
G7073XL
Y9630RU
1
4
8
1
4
Plate
Bolt
Washer
Gasket
Bolt
9
10
11
Y9121BU
Y9120WU
Y9801BU
4
4
4
Nut
Washer
Nut