User guide

10-2 10-3
IM 11Y01B01-01E-A 6th Edition :Feb 13, 2013-00
<10. Data Files anD Format>
calibr .pik
Calibration Pick List -
Factory Use Only
FACTORY PERSONNEL ONLY
S
S1
S2
.dat
Chemometric Model File
Parent spectra for chemometric model used only
for specialized applications that utilize the
TruePeak CLS measurement capability.
span00 .spe
Span Calibration Spectra
Absorption Spectrum and
coefcients at time of
calibration
This le is essential to the analyzer calibration - if
this le does not exist or is corrupted, modied or
otherwise tampered with then the analyzer
calibration is invalid. It contains essential
information relating to the Span Calibration of the
analyzer.
span01
to
span10
.spe
Historical Span
Calibration Spectra
Previous Absorption
Spectrum and
coefcients at time of
previous calibrations
span01 through span09 are previous les with
span01 being the most recent. The most recent
previous span01 can be restored in the analyzer
as ‘Previous Calibration’. The factory calibration
which can also be restored in the analyzer is
named span10.
system .cfg
System Conguration
All essential analyzer &
installation specic
parameters required by the
analyzer for the given
application & installation
This le is essential to the analyzer - if this le
does not exist or is corrupted, modied or otherwise
tampered with then the analyzer cannot function. It
contains analyzer specic parameters relating to every
detail of the measurement, calibrations, compensation
factors, I/O congurations, Valve control congurations,
signal processing, etc. This le is used by FACTORY
PERSONNEL ONLY to evaluate if the conguration is
appropriate for the analyzers intended use.
system .his
System History
A historical log of
conguration changes
System Conguration History - in the form of
ASCII data les that can be opened with Microsoft
“Notepad” as simple .txt le formats. The content
can then be copied and pasted into Microsoft
Excel spread. Each conguration change is logged with
the date (MM-DD-YYYY) and time that it occurred, the
parameter (e.g. opl) and the new value. Also, whenever
the analyzer is startedup or shut-down the ‘TruePeak
Open/Close” parameter will be logged.
Example:
11-20-2006 08:13:10 opl(inch) 39.96 43.31
11-20-2006 08:13:26 temperature(F) 509.0 86.0
11-20-2006 08:13:40 pressure(psi) 14.50 14.50