User guide

<4. Display and Operations while Connected to GC8000>
4-37
IM 11B06C01-01E
4.4.9 Shifting Chromatogram
A selected chromatogram can be shifted in the desired X-axis or Y-axis direction by dragging.
The shift function can be enabled or disabled using the menu command or toolbar button. If it is
disabled, the normal state is displayed. If it is enabled, the previous shift status is displayed.
If clearing shift information is selected from the menu command, the stored shift information is
cleared.
4.4.10 Re-integration of Chromatogram
The re-integration function can re-integrate chromatograms stored in a le and recalculate the
concentration values. It can also transfer the re-integration results to ASET and reect them on
subsequent measurements.
CAUTION
• This function is enabled for level C+ users.
• A peak can be re-integrated when “external third”, “external linear”, or “indirect method”
processing is specied for the peak.
Chromatogram
re-integration area
Figure 4.43 Chromatogram re-integration function (for external third)
5th Edition : Nov. 16, 2011-00