User guide
<4. Display and Operations while Connected to GC8000>
4-30
IM 11B06C01-01E
4.3.27 Calib. Settings
To set various types of data related to calibration, select the Calib. Settings tab window from the
Set Peak dialog box.
Figure 4.34 Set Peak dialog box (Information Related to Calibration)
In this dialog box, you can set the Standard Concentration, Standard Area, and Calibration
Coefcient for the specied stream number, system number, and peak number. Note that the
information about a stream not being set as the Calibration Stream is grayed out and you cannot
change it.
After you have changed the settings, click the Change button. A conrmation message asking
“Are you sure you want to send the data?” is displayed in the message box. When you respond
with “Yes”, the settings are changed.
5th Edition : Nov. 16, 2011-00