User guide

<4. Display and Operations while Connected to GC8000>
4-7
IM 11B06C01-01E
Figure 4.6 Password Input dialog box
4.2.4 Selecting GCM No.
You can select the active GCM as follows.
• Select the GCM Number command from the Window menu.
• Click the Change GCM Number button on the toolbar.
The active GCM number is shown when the Select GCM Number dialog box is opened. If the
active GCM is not selected, this eld is blank.
Figure 4.7 Select GCM Number dialog box
(If active GCM is selected (shown at left); if not selected (shown at right))
Select the GCM number and click the OK button, and the GCM having this number is selected.
However, if an active GCM is already selected, the following conrmation message is displayed.
If you respond with “Yes”, the select GCM Number dialog box is displayed.
Figure4.8 ConrmationmessagebeforechangingtheGCMnumber
You can select an active GCM directly by double-clicking the GCM display area. In this case, the
GCM select dialog box is not displayed.
If an active GCM is already selected, the above conrmation box opened. If you respond with
“Yes”, the active GCM is changed. If an active GCM is not selected yet, the GCM is selected
immediately.
5th Edition : Nov. 16, 2011-00