User guide
    <Appendix B  List of Messages>
B-4
IM 11B06C01-01E
n  Analysis Results
Message Meaning Countermeasures
On 
start-up
Analysis Results has already 
been opened.
An attempt is being made to start 
multiple Analysis Result Display.
The multiple display is not 
available.
Memory
Memory allocation error
Insufcient memory space
Memory space is insufcient. Check if adequate memory space 
required to carry out the operation 
has been secured.
[File]
Illegal le name
This le is not XXX le.
An attempt was made to open a 
le not having data corresponding 
to the current window.
Only open les relevant to the 
current window.
Reading error
Data is illegal.
An error occurred in reading 
the le.
The contents of the le attempting 
to be opened were incorrect; the 
le could not be opened.
Only open les with correct 
contents.
An error occurred while writing 
to a le.
Data was not saved to the 
le.
An error occurred while saving 
data. Data could not be saved.
Eliminate the cause of the error 
and try to save the le again.
Data has been modied. Do 
you want to save?
Window data has been modied. Click “Yes” if the data needs to be 
saved and then close the window.
File cannot be saved.
No data available.
The le can not be saved because 
the data is not indicated on the 
display.
Save the le after getting the data 
on the display.
[Graph]
No peak is selected.
¥r¥nPlease select at least 
one peak.
No peak is selected. Select at least one peak.
Max. value should be larger 
than min. value.
The max. value at Y-axis of the 
graph is less than min. value.
Set the larger value than the min. 
value at Y-axis of the graph.
On 
communication
Communication error while 
receiving data from Analyzer.
Failure of the data retrieve such 
as analyzer setting and analysis 
history.
Re-start the Analysis Result 
Window after checking the 
operation status of PCAS and 
Analyzers, and connection status 
of the cables.
Data 
editing
Wrong input value
Only numeric value can be 
entered here.
An attempt was made to enter 
data other than numeric values.
Re-enter numeric data.
5th Edition : Nov. 16, 2011-00










