User guide

<Appendix A List of Menus>
A-3
IM 11B06C01-01E
Menu Name Command Name Function
Measurement
Status
Stream Sequence Command the Stream sequence
Stream (Continuous) Command the Stream (continuous)
Stream (One cycle) Command the Stream (One cycle)
Calibration (Validation) Command the Calibration/Validation.
Start Calibration
(Validation)
Command the Calibration/Validation start.
End Calibration
(Validation)
Command the Calibration/Validation end.
Cancel Specication
Display Setting Analyzer ID Sets the analyzer ID of the analyzer to operate.
Select Page Selects the page to display in the Analyzer Status window.
Set Page Sets up the analyzer to display in the Analyzer Status window
page.
Option Transfer Parameters
- Upload Parameters
Uploads set parameters from the analyzer to the Engineering
Terminal and saves them to the hard disk..
Transfer Parameters
- Download Parameters
Downloads set parameters from the Engineering Terminal to the
analyzer.
Reset Analyzer Resets the analyzer.
Help Contents Displays the contents of Help in the Overview window.
Search by Keyword Displays Help on the basis of the keyword entered.
Version Info Displays the version information of the Overview window
n Analyzer Overview Window
T17A.ai
System
Main Upload
Oven1 Upload
Oven2 Upload
Oven3 Upload
User Program Upload
COM Upload
GC-HMI Upload
Main Download
Oven1 Download
Oven2 Download
Oven3 Download
User Program Download
COM Download
GC-HMI Download
Window
Latest Analysis
GCM No.
Analyzer Operation
Analysis Results
Chromatogram
Alarm
Anaraizer Configuration
Operation Mode
Help
Operation mode Change
Help
Reload Initial Database
Upload Parameter
Download Parameter
Upload User Script
Download User Script
Upload Software
Download Software
Memory Dump
Analyser Reset
Change All Operation Mode
5th Edition : Nov. 16, 2011-00