User guide

<5. Display and Operations while Connected to GC1000 Mark II>
5-50
IM 11B06C01-01E
(2) Edit the data in the cell contents change window and press the Return key.
The edited results will be displayed in the cell. (Press the ESC key to cancel editing.)
TIP
Limitation on data modication
• You can modify or erase data values in cells, but you cannot delete a cell itself to move successive dataYou can modify or erase data values in cells, but you cannot delete a cell itself to move successive data
upward.
How to choose a cell
• To select a cell, move the mouse cursor over the desired cell and click on it. Alternatively, you can use theTo select a cell, move the mouse cursor over the desired cell and click on it. Alternatively, you can use the
cursor keys to move the cursor.
n Overwriting (in a File Reference Window)
l Operation procedure
(1) Display the le reference window you wish to save and click on the Overwriting Save
command in the File menu.
• This operation can also be conducted by clicking the button on the toolbar.
(2) The window data is saved to the le without displaying a message.
n New File Save (in a File Reference Window)
l Operation procedure
(1) Display the le reference window you wish to save and click on the Save As command in the
File menu.
A dialog box for entering the storage destination appears.
F5-4-15.ai
(2) Select the drive name and directory name, enter the le name under which you wish to save
the data in front of the extension, and then click the OK button.
The data in the window will be written to and saved to the new le.
TIP
Extension
• An extension afxed to a le name upon saving is classied according to the window type as shown below.An extension afxed to a le name upon saving is classied according to the window type as shown below.
The window types can be identied by these extensions.
Latest analysis results: .ana
Concentration analysis history: .cnc
Retention time history: .rtm
Laboratory analysis results: .lab
Calibration coefcient history: .cef
File format
• The format of a le to save is a text le (separated by commas (,)). This le can be read by generalThe format of a le to save is a text le (separated by commas (,)). This le can be read by general
applications as well as from a le reference window within the Analysis Results window.
5th Edition : Nov. 16, 2011-00