User guide

<5. Display and Operations while Connected to GC1000 Mark II>
5-49
IM 11B06C01-01E
SEE ALSO
Subsection 5.5.5 for data modication
n Closing a File (on a File Reference Window)
If a le read in a le reference window is no longer required, close it using the following
procedure:
l Operation procedure
Display the le reference window you wish to close and click on the Close command in the File
menu.
The specied le is then closed.
TIP
• If the le has been modied, a dialog box asking if you want to save the changes appears. Click the YesIf the le has been modied, a dialog box asking if you want to save the changes appears. Click the Yes
button and enter the le name in the displayed dialog box to save the data as a new le. Note that if you
click the Cancel button in the displayed dialog box, the le will be closed without saving the modied data.
F5-4-13.ai
• Only one le can be displayed in a single le reference window. Opening the next le causes the previousOnly one le can be displayed in a single le reference window. Opening the next le causes the previous
le to be closed automatically.
5.4.5 Modifying and Re-saving Data
Data read in a le reference window (File Analysis Results, File Concentration Analysis History,
File Retention Time History, Laboratory Analysis Results or Calibration coefcient History
window) can also be modied. Further, modied data can be re-saved (overwritten) or saved to a
le under a different name (new save).
n Modifying Data (in a File Reference Window)
l Operation procedure
(1) Choose the cell you wish to modify in the le reference window and double click it (or press
the F2 key).
The data of the selected cell is displayed in the cell contents change window on the toolbar.
F5-4-14.ai
Cell contents
change window
5th Edition : Nov. 16, 2011-00