User guide

<5. Display and Operations while Connected to GC1000 Mark II>
5-12
IM 11B06C01-01E
l Window elements (Temperature Control Unit Operation window)
F5-2-11.ai
l Contents of display
The following table lists the contents of the display. The display items differ depending on the
conguration of the temperature controllers.
Display Item Description
SV Displays the temperature controller setpoint.
PV Displays the temperature controller measured value (current temperature).
State/Remark Displays the temperature controller status and comment.
Programmed
Temperature Oven*
Displays the temperature of a dual oven type programmed temperature
oven.
Isothermal oven* Displays the temperature of a dual oven type or single oven type isothermal
oven.
LSV 1, LSV 2 * Displays a sample valve temperature.
FPD Displays FPD detector temperature for single oven type.
*: The high limit of the set temperature differs for the explosionproof type.
5.2.5 Pressure Display Window
The Pressure Display window displays EPC statuses. The data updating cycle is 1 second.
l Display procedure
(1) Move the mouse cursor over the pressure indicator area of the valve display control section
and click.
The Press. Status window appears.
Valve display control section
F5-2-12.ai
Press.
Status window
Click
Close
command
(2) To exit the Press. Status window, click on the Close command in the Control menu.
l Window elements (Press. Status window)
F5-2-13.ai
5th Edition : Nov. 16, 2011-00