Instruction Manual

<1. Overview>
1-41
IM 11B08A01-01E
F0121.ai
Figure 1.20 Stream sequence window on the GCM operation status screen on the GC-HMI analyzer
operation display
11/03/22
15:15:45
Stream Sequence (1/4)
GCM #1 Seq #1
- #01 Stream 1 (STR1) - Excuted
- #02 Stream 2 (STR2) - Excuted
- #03 Stream 3 (STR3) - Excuted
- #04 Stream ** (********) - Not excuted
- #05 Stream ** (********) - Not excuted
- #06 Stream ** (********) - Not excuted
- #07 Stream ** (********) - Not excuted
- #08 Stream ** (********) - Not excuted
- #09 Stream ** (********) - Not excuted
Menu Gate Valve Atm GCM# Seq#
F1 F2 F3 F4 F5 F6
Figure 1.21
An example of the stream sequence setting screen on the GC-HMI EtherLCD
 In the case where a stream sequence change command is received during the stop mode in
the stream sequence status [1A1]
The measurement status is immediately changed to the requested stream sequence status.
In this case, the operation mode remains unchanged from the stop mode.
* Requests for changes to the same stream sequence number are invalid.
2nd Edition : May 11, 2012-00
1