Instruction Manual

<Appendix H GC User Programming Debugger (GCUD)>
App.H-6
IM 11B08A01-01E
 Menus
The following describes each menu. The contents displayed may differ depending on the
settings.
 File (F)
Sub menu Short cut Description
New [Ctrl]+[N] Creates a new script fi le and initializes GCM data.
The default name of a new fi le is “AnaEnd_number.” (E.g.: AnaEnd_1.
ymb)
Up to 100 new fi les can be simultaneously created. If 100 script fi les are
open on the Script Edit window, the New menu will be disabled.
Open [Ctrl]+[O] Opens the next script fi le (*.ymb).
Periodic script fi le name: Cycle_n.ymb (n = 01 to 64)
Script fi le name at the end of analysis: AnaEnd_n.ymb (n = 1 to 6)
When a script fi le is opened, GCM setting data fi les (*.gms) with the
same fi le name will be read simultaneously. If there is no GCM setting
data fi le (*.gms), GCM setting data is newly created.
Up to 100 fi les can be simultaneously opened. If 100 script fi les are open
on the Script Edit window, the Open menu will be disabled.
Close  Closes the Script Edit screen for the active script.
Save [Ctrl]+[S] Saves an open script. If a new script is saved, this submenu works in the
same way as the Save As....
When a script is saved by overwriting, a GCM setting data fi le (*.gms)
with the same fi le name is also updated simultaneously.
If a script is being executed, the Save menu is disabled and no operation
can be made.
Save As...  Saves a script with a specifi ed fi le name. (A GCM setting data fi le (*.gms)
with the same fi le name is also updated simultaneously.)
If a script is being executed, the Save As… menu is disabled and no
operation can be made.
Import GCM
Setting Data...
 Imports a GCM setting data export fi le (*.if) and updates GCM setting
data.
While a script is being executed, the Import GCM Setting Data… menu is
disabled and no operation can be made.
Export GCM
Setting Data...
 Exports GCM setting data to the GCM setting data export fi le (*.if).
2nd Edition : May 11, 2012-00