Instruction Manual

<Appendix H GC User Programming Debugger (GCUD)>
App.H-2
IM 11B08A01-01E
 Window Confi guration
The GCUD consists of one main window and four sub-windows. For details, see “3.
Description of Each Window” of page App.H-5.
Script Edit window
Output window
GCM Setting/
Status window
Watch window
Figure 2 GCUD window confi guration
 Script Edit window
This is the main window with the menu bar.
In the main window, you can run and control a user program, display or hide other windows, etc.
In conjunction with sub-windows (Watch, Output, and GCM Setting/Status windows), it is used to
read/write, edit, import/export, print, and debug a script fi le.
Furthermore, as the Script Edit window, it displays a user program script and allows you to edit it
and set breakpoints. Multiple fi les can be opened simultaneously, but only the active fi le can be
edited.
A script fi le of up to 64 kB can be edited.
 Output window
This sub-window displays the results of executing a user program script, output details of the DP
command, and analysis and execution errors.
 Watch window
This window displays variables and allows you to edit them.
 GCM Setting and GCM Status windows
Although the GCM Setting and GCM Status are independent windows, they are displayed in the
same position in the initial status.
In the GCM Setting window, you can set and display data.
In the GCM Status window, you can check the results of executing a user program script instead
of checking on the GC8000 main unit.
2nd Edition : May 11, 2012-00