Instruction Manual
  <5. EtherLCD>
5-100
IM 11B08A01-01E
•  Data acquisition peak 1 to 8
  Set peak number of the cal run stream to acquire data used to compile a SimDis calib curve.
•  Elapsed Time 1 to 8, Standard B.P. 1 to 8 
  Curve data of a SimDis Calib curve. Auto updating and manual entry are possible.
•  When GCM cal run stream set to Yes for calib curve updating on the SimDis Setup screen 
is executed, the peak retention time acquired by executing cal run stream and Standard B. 
P. data on the corresponding peak set-up specifi c screen are used to calculate time date 
beyond Elapsed Time 6 set in the SYS method (from cal setup screen the corresponding 
stream number can identify SYS method number) to update the calib curve coef a and the 
calib curve coef b. Again, the retention time acquired through the activated cal run stream 
is set to Elapsed Time and the standard B.P. set in Peak Setup-Specifi c is updated to the 
Standard B.P.
When F5 (SYS #) is pressed, “SYS Number:” is displayed on the second line below. Use the 
numeric keypad to enter the number and press the SET/ENT key, and a cursor jumps to the SYS 
number. However, only SYS numbers set in GCM are selectable, when any other number is 
entered, “Over limit” is displayed on the second line below.
F6 (Method #): Specifi es a Method number.
Display Item Name Set Lower Limit Upper Limit Unit Remarks
GCM # GCM Number 
SYS # SYS Number  
Method # Method number  
Data acquisition 
stream 
 031
Calib curve coef a 9.999 9.999
Calib curve coef b 999.999 999.999
Data acquisition 
peak 1 to 8
 0 999
Elapsed Time1 to 8  0.0 21600.0
Standard B.P.1 to 8 9999.9 9999.9
5.4.26  User Setup (User Defi ned) 
11/11/22
15:15:45
Units Setup (User Defi ned) 
Unit #  21
> - Unit name aaaaaaaa
Menu Unit#
F1 F2 F3 F4 F5 F6
Figure 5.1
13  Example of User Setup (User Defi ned) screen
F1 (Menu):  Displays the Table menu screen.
F6 (Unit #):  Enters User defi ned unit numbers.
Display Item Name Set Lower Limit Upper Limit Unit Remarks
Unit # User defi ned unit 
number 
21 100
Unit Name Unit name  8 one-bite alphanumeric 
characters
2nd Edition : May 11, 2012-00










