Instruction Manual

<5. EtherLCD>
5-88
IM 11B08A01-01E
Display Item Name Set Lower Limit Upper Limit Unit Remarks
Slot # Slot number 1 5
AI # A/I input number 1 4
Signal Name A/I signal name  Alphanumeric: 8 characters
Filtering const A/I fi ltering constant  0.001 1.000
5.4.19 Network Setup
Set up IP addresses and networks.
11/11/22
15:15:45
Network Setup
Main
> - HY-A IP address 192. 168. 1. 1
- Gateway IP_A 192. 168. 1. 250
- Subnet mask 255. 255. 255. 0
- PCAS confi g Single
- ASGW confi g Single
- DCS confi g Single
- Scaling coef Real
Menu
Redundant Dial_ip
F1 F2 F3 F4 F5 F6
Figure 5.100 Example of network setup (Main) screen
F1 (Menu): Displays the Table menu screen.
F4 (Redundant): Displays the Redundant setup screen.
• F4 (Redundant) is valid only when the Ethernet (ch2) is installed.
 Redundant setup screen
Execute the redundant setup.
Press F4 (Redundant).
11/11/22
15:15:45
Network Setup
Redundant
> - Virtual IP address 192. 168. 1. 1
- PHY-B IP address 0. 0. 0. 0
- Gateway IP_B 0. 0. 0. 0
- Diag Interval 500 ms
Menu Main Dial_ip
F1 F2 F3 F4 F5 F6
Figure 5.101
Example of network setup (Redundant) screen
F1 (Menu): Displays the Table menu screen.
F3 (Main): Displays the Main screen.
2nd Edition : May 11, 2012-00