Instruction Manual

<5. EtherLCD>
5-84
IM 11B08A01-01E
Display Item Name Set Lower Limit Upper Limit Unit Remarks
Slot # 1 5 Limited
DO # 1 5 Limited
Process
assignment
 No process, Stream sequence,
Stream, Operation mode, Alarm,
Timing, Cal/Val, Str valve select
GCM number  1, (0) 6 Setting possible only when 1(0)
to 6, process assign entails
stream sequence, cal (val),
operation mode and alarm. In
the case of alarm, GCM number
0 is applicable to all GCEX
alarm. GCM number range is 1
to 6 when other than alarm.
Stream
sequence 1
to 8
 No output, Output
Initial value for stream sequence
1 only has Output. Others have
No output.
Stream
number
 131
Operation
mode
 Run, Run (including warming up
time), Stop, Pause
Alarm
level 1, 2,
Composition
alarm
 No output, Output
SYS Number  1 6 Limited
SYS method  1 6 Limited
1st to 3rd
times
 No output, Output
Cal 1 to 6  No output, Output
Val 1 to 6  No output, Output
Stream valve
number
 131
5.4.16 D/I Setup
11/11/22
15:15:45
D/I Setup
Slot # 1 DI # 1
> - Signal name
- Process assign Range Select
- Stream number 1 (GCM 1)
Peak number 1
- Range number 1
Menu Status Slot# DI#
F1 F2 F3 F4 F5 F6
Figure 5.97
Example of D/I setup screen
F1 (Menu): Displays the Table menu screen.
F3 (Status): Displays the D/I status screen.
F5 (Slot#): Sets a slot number.
F6 (DI#): Sets a D/I number.
2nd Edition : May 11, 2012-00