Instruction Manual

<5. EtherLCD>
5-82
IM 11B08A01-01E
11/11/22
15:15:45
D/O Setup
Slot # 1 DO # 1
> - Process assign Stream
- Stream 1 (GCM 1)
Menu Status Slot# DO#
F1 F2 F3 F4 F5 F6
Figure 5.91
Example of D/O setup screen (setting the Process assign to stream)
• The GCM number displayed on the screen cannot be set.
• When an Over limit value is set as the stream, “Over limit” is displayed in the bottom line and
the set value is not shown.
11/11/22
15:15:45
D/O Setup
Slot # 1 DO # 1
> - Process assign Operation mode
- GCM number 1
- Operation mode Stop
Menu Status Slot# DO#
F1 F2 F3 F4 F5 F6
Figure 5.92
Example of D/O setup screen (setting the Process assign to 0peration mode)
• When an Over limit value is set as a GCM number, “Over limit” is displayed in the bottom
line and the set value is not shown.
• Warming up time for the currently operated stream is not included in case of Run.
11/11/22
15:15:45
D/O Setup
Slot # 1 DO # 1
> - Process assign Alarm
- GCM number 1
- Alarm level 1 AAAAAAA
- Alarm level 2 AAAAAAA
- Composition Alarm AAAAAAA
Menu Status Slot# DO#
F1 F2 F3 F4 F5 F6
Figure 5.93
Example of D/O setup screen (setting the Process assign to Alarm)
2nd Edition : May 11, 2012-00