Instruction Manual

<1. Overview>
1-6
IM 11B08A01-01E
M12 screw
25±5
*3: The four outer holes are used
for installation.
The height of M12 screw
(prepared by user) is 25 ±5 mm
from the floor.
*4: Required clearance needed for wiring.
(580) 400
300
590
(1280)
1100
20
580
69 440 375560410
430
2050
(1854)
A
22.5
(580)(190)
(800)
(430)
300
50040
Liquid-sample
valve (LSV) *1
Liquid-sample
valve (LSV) *1
Large isothermal oven
Analyzer base sampling
unit (GCSMP) or base
Inlet/outlet for sample gas,
standard gas and others
Rc1/4 or 1/4NPT
Steam drain outlet *1
Rc1/4 or 1/4NPT
Steam inlet *1
Rc1/4 or 1/4NPT
Standard isothermal oven
Type 2 (Self-standing)
Weight: approx. 190 kg
Protection system A *1
Holes for installation
4-ø15 *3
*4
(430)
Operation panel *1
Grounding wiring
(100  or less)
Connection to electronics section *2
Wiring connection *2
Air outlet for stream swiching valve *1
6 mm or 1/4” tube
Purging air inlet
Rc1/4 or 1/4NPT
Vent for purging air
Inlet/outlet for sample gas, carrier gases, etc.
6 mm or 1/4” tube
Unit: mm
Pressure gauge *1
Control unit
*1: It depends on specifications.
*2: Wiring connections are shown in
right figures.
View A
Vent header *1
(connection
Rc1/2 or
1/2NPT)
<Maintenance space>
(62)
282835b
(62) 36
36
125125
For TIIS (wiring connection: G3/4)
For FM-X (wiring connection: 3/4NPT)
For FM-Y (wiring connection: 3/4NPT)
For ATEX, IECEx (wiring connection: M25x1.5)
Connection 3/4NPT
Connection
G3/4
Connection G3/4
Connection 3/4NPT
Connection M25x1.5
For ATEX, IECEx (wiring connection: G3/4 or 3/4NPT)
Cable gland
Sealing fitting
(as accessories)
(for Ethenet cable)
Connection 3/4NPT
Sealing fitting
(as accessories)
(for Ethenet cable)
Cable gland
Cable gland (as accessories)
For TIIS (wiring connection: 3/4NPT)
Connection
3/4NPT
Cable gland (as accessories)
Connection a
Connector (as accessories)
Connector (as accessories)
Connector
(as accessories)
Wiring
connection
a b
G3/4 31
3/4NPT 29
Protection system B *1
(only 100 V)
(85)(85) 36
c
Wiring
connection
a b c
G3/4 31 30
3/4NPT 29 28
2nd Edition : May 11, 2012-00