Instruction Manual

<5. EtherLCD>
5-46
IM 11B08A01-01E
11/11/22
15:15:45
Operating Parameters (7/8)
> - SV air press
- Elec Purge press
Menu
F1 F2 F3 F4 F5 F6
Figure 5.59
Example of the operating parameters screen (7/8)
F1 (Menu): Displays the Table Menu screen.
Display Item Name Set Lower Limit Upper Limit Unit Remarks
SV air press  Alpanumeric: 18 characters
Elec purge
press
 Alpanumeric: 18 characters
11/11/22
15:15:45
Operating Parameters (8/8)
Oven # 1
> - Oven air Press
- TPM Vortex press * * * * * * * * * * * * * * * * * *
- FPD Vortex press
Menu Oven#
F1 F2 F3 F4 F5 F6
Figure 5.60
Example of the operating parameters screen (8/8)
F1 (Menu): Displays the Table Menu screen.
F6 (Oven #): Selects an oven number.
TIP
• The oven numbers set to Not provided on the Temperature Control Set cannot be selected.
• The initial screen displays the smallest oven number among those assigned to isothermal
ovens on the Temperature Control Set.
Display Item Name Set Lower Limit Upper Limit Unit Remarks
Oven # Oven number 1 3
Oven air
press
 Alpanumeric: 18 characters
TPM vortex
press
 Alpanumeric: 18 characters
FPD vortex
press
 Alpanumeric: 18 characters
2nd Edition : May 11, 2012-00