Instruction Manual

<5. EtherLCD>
5-26
IM 11B08A01-01E
11/11/22
15:15:45
Remote D/O Operation (1/N)
R-DO# Status
> - 1 A
- 2 A
- 3 A
- 4 A
- 5 A
- 6 A
- 7 A
- 8 A
- 9 A
Menu
F1 F2 F3 F4 F5 F6
Figure 5.30
Example of the remote D/O operation screen
F1 (Menu): Displays the Operation Menu screen.
TIP
For this operation, the user level C or higher is required.
Display Item Name Set Lower Limit Upper Limit Unit Remarks
R-DO # Remote D/O contact
number
○
1 32 Number Up to 32 contacts
Status  0: Off
1: On
5.3.6 User Program Operation
 User Program Operation screen
The screen displays the execution status and current status of the user program (end of peak
detect script). The change of the execution status and the forced stop of the script are also
possible via this screen.
11/11/22
15:15:45
User Program Operation (1/9)
11/11/22
15:15:45
User Program Operation (2/9)
Enable Status Enable Status
> - SYS#1 Disable Stopping > - Period#1 Disable Stopping
- SYS#2 Disable Stopping - Period#2 Disable Stopping
- SYS#3 Disable Stopping - Period#3 Disable Stopping
- SYS#4 Disable Stopping - Period#4 Disable Stopping
- SYS#5 Disable Stopping - Period#5 Disable Stopping
- SYS#6 Disable Stopping - Period#6 Disable Stopping
- Period#7 Disable Stopping
- Period#8 Disable Stopping
Menu Edit Stop Menu Edit Stop
F1 F2 F3 F4 F5 F6 F1 F2 F3 F4 F5 F6
Figure 5.31
Example of the user program operation screen
The screen displays the execution status and current status of the user program (period script).
The change of the execution status and the forced stop of the script are also possible via this
screen.
F1 (Menu): Displays the Status Menu screen.
2nd Edition : May 11, 2012-00