Instruction Manual

<5. EtherLCD>
5-15
IM 11B08A01-01E
The MODBUS communication status with the registered GC is displayed together with the IP
address of the GC.
Display Item Name Set Lower Limit Upper Limit Unit Remarks
MODBUS
client
MODBUS
connection status
None
Connected
Disconnected
MODBUS IP address
 MAC Address screen
To display the MAC address, press F6 (MAC).
11/11/22
15:15:45
Ethernet Status
MAC
MAC address A 00 : 00 : 00 : 00 : 00 : 00
MAC address B 00 : 00 : 00 : 00 : 00 : 00
Menu
MODBUS TCP
F1 F2 F3 F4 F5 F6
Figure 5.17 Example of the MAC address screen
Display Item Name Set Lower Limit Upper Limit Unit Remarks
MAC address
A, MAC
address B
Addresses are entered in decimal digits using periods as delimiters. For example, the address
192.168.0.24 can be entered as is.
5.2.9 Alarm Status
The detailed contents of the alarm can be indicated at the GC-HMI.(Refer to “4.7 Alarm Screen”)
Pressing the function key “F2” causes a transition to the alarm history screen.
TIP
• The screen for GCM#1 to 6 indicates the alarm to be occurred at each GC module. It for GCM#0 displays
the entire hardware alarm.
• The display can be scrolled vertically by the alarm row using the vertical scroll keys.
2nd Edition : May 11, 2012-00
5