Instruction Manual

<5. EtherLCD>
5-8
IM 11B08A01-01E
5.2.4 D/O Status
 D/O Status screen (Normal Output)
The D/O (contact output) status is displayed on the screen.
11/11/22
15:15:45
D/O Status
Slot # 1
DO# Output item Status
1 Stream STR1 Off
2 No processing Off
3 No processing Off
4 No processing Off
5 No processing Off
Menu Table Slot#
F1 F2 F3 F4 F5 F6
Figure 5.8
Example of the D/O status screen
F1 (Menu): Displays the Status Menu screen.
F4 (Table): Displays the D/O Setup screen.
F6 (Slot #): Sets a slot number.
TIP
• The Status is refreshed automatically at a fi xed interval (1 second).
• On the initial screen, the smallest slot number among those of the D/O cards inserted is displayed.
• For the slot number setting, only slot numbers of D/O or DI/O cards can be accepted.
• Up to CH3 are displayed for DI/O cards.
If no D/O cards are inserted, the Status Menu screen displays “Not load” on the bottom.
 D/O Status screen (Stream Identifi cation)
11/11/22
15:15:45
D/O Status
Slot # 1
DO# Output item Status
1 Stream identifying fl ag Off
2 Stream identifi cation Off
3 Stream identifi cation Off
4 No processing Off
5 No processing Off
Menu Table Slot#
F1 F2 F3 F4 F5 F6
Figure 5.9
Example of the D/O Status screen (Stream Identifi cation)
F1 (Menu): Displays the Status Menu screen.
F4 (Table): Displays the D/O Setup screen.
2nd Edition : May 11, 2012-00