Instruction Manual

<5. EtherLCD>
5-4
IM 11B08A01-01E
11/11/22
15:15:45
User Level Switching
User Level B
User Level A by SET/ENT pressing
F1 F2 F3 F4 F5 F6
Figure 5.3 Example of the user level switching screen (when the current level is other than A)
This screen is displayed in local mode.
When
is pressed, the current mode is changed to the remote mode and the user level is
changed to A.
Passwords can be changed. See the 5.3.11 Password Setting for details.
5.2 Status Display Screen
When is pressed on the EtherLCD screen, the screen navigates to the Status Display
screen.
11/11/22
15:15:45
Status Menu (1/2)
11/11/22
15:15:45
Status Menu (2/2)
> - A/I Status > - Standard B.P data
- A/O Status - Operation Status
- D/I Status
- D/O Status
- Remote A/O Status
- Remote D/O Status
- Revision number
- Ethernet Status
- Alarm Status
F1 F2 F3 F4 F5 F6 F1 F2 F3 F4 F5 F6
Figure 5.4 Status menu screen
The following menu screen is displayed after is pressed.
To display the Status Menu (1/2), press
.
TIP
• If the AI, AO, D/I and D/O cards are not inserted, the associated menu cannot be selected.
• If the Analog output num is 0 on the GCCU Setup screen, the Remote A/O status cannot be selected.
2nd Edition : May 11, 2012-00