Instruction Manual

<5. EtherLCD>

5-3

IM 11B08A01-01E

5.1 User Level Switching

Before conducting any settings, the user level requires to be changed.

NOTE

The user level settings for the Analyzer Operation Data Display and EtherLCD are independent

and need to be set separately.

Press

among menu keys.

is pressed when the current user level is A (default), the screen shown in Figure 5.2 is

displayed.

11/11/22

15:15:45

User Level Switching

Password * * * *

F1 F2 F3 F4 F5 F6

Figure 5.2 User level switching screen (when the current level is A)

This screen is displayed in remote mode.

A four-digit numeric password must be entered.

(Press

key to complete.)

(1) When the user level B password (1192) is entered - The user level is set to B.

(2) When the user level C password (1603) is entered - The user level is set to C.

When

is pressed after entering a password with numeric keys, the following screen is

displayed.

Table 5.1 User levels and authorities

User level Authorities Password

A Not required (default)

B 1192

C 1603

C+ 1702

If the user level is other than A, the screen shown in Figure 5.3 is displayed. This example shows

the case where the current user level is C.

2nd Edition : May 11, 2012-00