Instruction Manual

<4. GC-HMI (touch panel)>
4-58
IM 11B08A01-01E
(A) Graph setup
Press .
Set up a graph as desired. The dialog consists of two pages.
Figure 4.78 Page 1
(1) Display Upper/Lower Limit
Show or hide the upper limit and lower limit by enabling or disabling, respectively, their
check marks.
(2) Upper/lower limit settings
Set the values of upper limit and lower limit. The setting ranges are as follows:
Upper limit: 0 to 12000 Lower limit: 0 to 10000
TIP
The upper limit must be greater than the lower limit.
(3) Legend Display
Defi ne what information to include in legends, by selecting Str.#-Peak#-Peak Name (Unit) or
Only Peak Name (Unit).
(4) Peak Select
Up to six peaks can be displayed. At least one peak must be selected.
2nd Edition : May 11, 2012-00