Instruction Manual

<4. GC-HMI (touch panel)>
4-35
IM 11B08A01-01E
Figure 4.43
Setting range:
Gate cut method: Select Time gate, Slope gate, Slope/Time, Time/Slope, or Zone.
Integ method: Select Skimming or Vert.
 Calib Settings
Set the standard concentration, standard area, and calibration factor for the peak of the specifi ed
stream number, SYS number, and peak number. These settings apply only to the calibration
stream.
Figure 4.44
2nd Edition : May 11, 2012-00
4