Instruction Manual

<4. GC-HMI (touch panel)>

4-29

IM 11B08A01-01E

 Measurement status

Select the desired measurement status of the active GCM from the following:

Stream sequence: Measurement will be executed in the order of stream sequence speciﬁ ed

here. After the selection, set the sequence number (1 to 8).

Figure 4.34

Specify str: The stream speciﬁ ed here will be measurement. After the selection,

set the stream number (1 to 31) and the number of repetitions (0 for

continuous, or 1 to 9999).

Figure 4.35

2nd Edition : May 11, 2012-00