Instruction Manual

<4. GC-HMI (touch panel)>

4-6

IM 11B08A01-01E

Table 4.3 Setting Screens and User Levels

Setting screen

User level

Reference

ABCC+

General Setting

User Level Setting

4.1.1 General SettingAnalyzer Setting

EhteLCD

GC-HMI Setting

Network Settings — —

4.1.2 GC-HMI Setting

Display Setting —

GC-HMI Reset — —

Communication Management — — — —

GC8000 Setting

Reload Initial Database —

4.1.3 GC8000 SettingParameter Import — —

Parameter Export — — — —

Alarm Setting Clear Alarm Status — — — 4.1.4 Alarm Setting

Alarm Popup Restriction — —

—: Cannot be selected.

4.1.1 General Setting

This section describes the General Setting of the setting screen.

Figure 4.5 General Setting

 User Level Setting

User levels are set to deﬁ ne the scope of operations allowed for each user.

The default setting is user level A, which only allows the user to view screens.

The user levels for analyzer operation data display and EtherLCD are independent from each

other, and they must be set separately.

2nd Edition : May 11, 2012-00