User guide

<5. Diagnostic Window>
5-4
IM 11B06E01-01E
5.3 Checking the analyzer communication
status and displaying the mapping data
The communication status window is displayed when [Modbus I/F] - [comm.status] is clicked.
UPDATE: Thedataisupdated.
ID:  StnID(deneinthemappingle)
TYPE:  GC8000/GC1000/PCAS/ASIU(denedinthemappingle)
IPAddr: IPaddress(deneinthemappingle)
TASK: The status is “OK” when the communication task is in operation.
COMM: The status is “NG” when the communication error occurs.
WRITE: The status is “NG” when it fails the writing, but is “OK” when it successes.
READ OK: Number of success in reading
READ NG: Number of failure in reading
WRITE OK: Number of success in writing
WRITE NG: Number of failure in writing
The mapping data window is displayed when [Modbus I/F] - [mapped data] is clicked.
4th Edition : Nov. 22, 2011-00