Owner manual

4-17

IM 11B03A03-01E

4.4.5 Actions of Validation

Validation 1 to 3 is allowed to be specified only when the measurement status is in Stream

Sequence 1 to 4 or in Stream (continuous) 1 to 31. Actions are different according to

settings. The same action is performed when the starting time comes at any timing during

analysis.

• Automatic Validation

(1) An action when the starting time of Automatic Validation 1 comes while the measure-

ment status is in Stream Sequence 1 and the operation mode is in Run, is shown in

Figure 4.19.

W9 W3 W1 W2W2

S1 S2 S9

S9 S3 S1

Starting time of Automatic Validation 1

Time

Stream Sequence 1 Stream Sequence 1Validation 1

S1 to S9: Analysis cycles for streams 1 to 9

W1 to W9: Warming up time for streams 1 to 9

F0419.EPS

Figure 4.19 Action of Automatic Validation (1)

(2) An action when the starting time of Automatic Validation 1 comes while the measure-

ment status is in Stream (continuous) 1 and the operation mode is in Run, is shown in

Figure 4.20.

W9 W1 W1 W1W1

S1 S1 S9

S9 S1 S1

Starting time of Automatic Validation 1

Time

Stream (Cont) 1 Stream (Cont) 1Validation 1

S1, S9: Analysis cycles for streams 1 and 9

W1, W9: Warming up time for streams 1 and 9

F0420.EPS

Figure 4.20 Action of Automatic Validation (2)

3rd Edition : Aug. 23. 2006-00