Owner manual

4-14

IM 11B03A03-01E

4.4.4 Actions of Calibration

Calibration 1 to 3 is allowed to be specified only when the measurement status is in Stream

Sequence 1 to 4 or in Stream (continuous) 1 to 4. Actions are different according to the

specified calibration (validation) method.

• Automatic Calibration

The same action is performed when the starting time comes at any timing during analysis.

(1) An action when the starting time of Automatic Calibration 1 comes while the measure-

ment status is in Stream Sequence 1 and the operation mode is in Run, is shown in

Figure 4.13.

W7 W8 W3 W1W2

S1 S2 S7

S7 S8 S3

Starting time of Automatic Calibration 1

Time

Stream Sequence 1 Stream Sequence 1Calibration 1

S1 to S8: Analysis cycles for streams 1 to 8

W1 to W8: Warming up time for streams 1 to 8

F0413.EPS

Figure 4.13 Action of Automatic Calibration (1)

(2) An action when the starting time of Automatic Calibration 1 comes while the measure-

ment status is in Stream (continuous) 1 and the operation mode is in Run, is shown in

Figure 4.14.

W7 W8 W1 W1W1

S1 S1 S7

S7 S8 S1

Starting time of Automatic Calibration 1

Time

Stream (Cont) 1 Stream (Cont) 1Calibration 1

S1 to S8: Analysis cycles for streams 1 to 8

W1 to W8: Warming up time for streams 1 to 8

F0414.EPS

Figure 4.14 Action of Automatic Calibration (2)

3rd Edition : Aug. 23. 2006-00