Owner manual

4-10

IM 11B03A03-01E

4.4.1 Actions of Stream Sequence

The same action is performed when the Stream Sequence is specified at any timing during

analysis.

(1) An action when the operation mode is transferred from Stop to Run while the mea-

surement status is in Stream Sequence 1, is shown in Figure 4.5.

W2 W3 W1 W2 W3 W1W1

S1 S2 S3 S1 S2 S3

Run command

Time

Stream Sequence 1

S1 to S3: Analysis cycles for streams 1 to 3

W1 to W3: Warming up time for streams 1 to 3

F0405.EPS

Figure 4.5 Action of Stream Sequence (1)

(2) An action when Stream Sequence 2 is specified while the measurement status is in

Stream Sequence 1 and the operation mode is in Run, is shown in Figure 4.6.

W5 W6 W4 W5W2

S1 S2 S5

S4 S6 S4

Selet the Stream Sequence 2

Time

Stream Sequence 1 Stream Sequence 2

S1 to S6: Analysis cycles for streams 1 to 6

W1 to W6: Warming up time for streams 1 to 6

F0406.EPS

Figure 4.6 Action of Stream Sequence (2)

(3) An action when Stream Sequence 1 is specified while the measurement status is in

Stream (continuous) 2 and the operation mode is in Run, is shown in Figure 4.7.

W2 W3 W1 W2W2

S2 S2 S2

S1 S3 S1

Select the Stream Sequence 1

Time

Stream (Cont) 2 Stream Sequence 1

S1 to S3: Analysis cycles for streams 1 to 3

W1 to W3: Warming up time for streams 1 to 3

F0407.EPS

Figure 4.7 Action of Stream Sequence (3)

(4) When Stream Sequence 1 is specified while the measurement status is in Stream

Sequence 2 to 4 or in Stream (continuous) 1 to 31 and the operation mode is in Stop

or in Pause, the measurement status is immediately changed to Stream Sequence 1

and the operation mode to Stop. The same action is performed when Stream Se-

quence 2 to 4 is specified.

3rd Edition : Aug. 23. 2006-00