Manual

<1. Overview of Maintenance Terminal>
1-4
IM 11B03G03-03E
1.3 Notes Before Use
The Maintenance Terminal is a software package which runs under Windows™. In this section,
you will learn basic operations common to the Windows™ software.
n Mouse
A mouse is used to work with the Maintenance Terminal.
l Basic Mouse Operations
The mouse cursor ( ) in the window moves as you move the mouse. Place the mouse cursor on
an item you want to select in a window and click the left mouse button to select it.
l Buttons
There are three ways to press mouse buttons:
Click: Press the left button and immediately remove your nger. Normally, most
clicking operations use the left button, but some may use the right button.
“Click” in this manual means to press the left button.
Double click: Press the left button twice in quick succession.
Drag: Move the mouse from a starting position to an ending position while pressing
down the left button, and then release your nger. This is used, for example, to
select a number of items at once.
n Window Layout
The gure below illustrates the window layout, using the Analyzer Operation window as an
example.
F0103.ai
Border line
Menu bar
Close button
Minimize buttonTitle barControl menu box
4th Edition : Mar. 21, 2012-00