Manual

<12. Parameter Lists>
12-6
IM 01S01C01-01EN
Relative
Index
Index Parameter Name Factory Default
Write
Mode
Explanation
25 2025 DISP_PAGE_INFO 2 AUTO Parameter for turning on or off current page numbers dis-
played as an xx/yy fraction in the top right corner of the LCD
screen.
0 = On during highlighting when display screens are switched
1 = Always On
2 = Always On during highlighting
26 2026 DISP_QUIET_MODE 0 AUTO Use to specify LCD operation after switching screens.
0 = Displays last output screen
1 = Switches screens at specied intervals to display all
screens
2 = LCD display Off
27 2027
DISP_FORMAT_TYPE 0 AUTO Not currently used.
28 2028 DISPLAY_CYCLE 0 AUTO Use to set interval when screens are switched.
0 = Auto (automatically set depending on ambient tempera-
ture)
1 = 0.5 sec
2 = 1.0 sec
3 = 2.0 sec
4 = 4.0 sec
29 2029 DISPLAY_TEST 0 AUTO Parameter to turn LCD test mode on and off.
30 2030
DISPLAY_CONTRAST 32 (0x20) AUTO Parameter for setting relative brightness (contrast) between
the LCD when it is on and when it is off.
31 2031 SQUAWK 0 AUTO Turns Squawk on and off.
32 2032
AMBIENT_TEMPERATURE 0 - Indicates amplier temperature.
33 2033
MAIN_CONNECT_TYPE 0 AUTO Use to set the connection (MAO or ISEL function block) for 16
inputs at one time.
0 = All 16 inputs are input to simulation
1 = All 16 inputs are connected to MAO-FB
2 = All 16 inputs are connected to ISEL-FB
34 2034 IN01_CONNECTION 0 AUTO Use to specify what values of IN01 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN01
2 = Connected to ISEL-FB_1 IN01
35 2035 IN02_CONNECTION 0 AUTO Use to specify what values of IN02 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN02
2 = Connected to ISEL-FB_1 IN02
36 2036 IN03_CONNECTION 0 AUTO Use to specify what values of IN03 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN03
2 = Connected to ISEL-FB_1 IN03
37 2037 IN04_CONNECTION 0 AUTO Use to specify what values of IN04 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN04
2 = Connected to ISEL-FB_1 IN04
38 2038 IN05_CONNECTION 0 AUTO Use to specify what values of IN05 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN05
2 = Connected to ISEL-FB_1 IN05
39 2039 IN06_CONNECTION 0 AUTO
Use to specify what values of IN06 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN06
2 = Connected to ISEL-FB_1 IN06
40 2040 IN07_CONNECTION 0 AUTO Use to specify what values of IN07 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN07
2 = Connected to ISEL-FB_1 IN07
41 2041 IN08_CONNECTION 0 AUTO Use to specify what values of IN08 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN08
2 = Connected to ISEL-FB_1 IN08