Quick Start Guide

<A1. Header>

IM 01C25R51-10E

3. Installation Flow

Followings are the ow of standard installation. As the procedures may differ according to the condition, please nd details in

each designated manual and follow the instructions.

Step 1

Conrm incompatible software does not exist, PRM and FSA210 (Refer to < Document No.2>)

Step 2

Install communication device software (For FOUNDATION eldbus communication)

Step 3

Install FieldMate (Refer to <Document No.1>)

1) Install FieldMate <Disc No.1 >

2) Enter the license number of FieldMate <License Sheet No.1 >

3) Install Device Files <Disc No.2 >

Step 4

Install FlowNavigator <Disc No.3 >

Step 5

Start FieldMate

1) Register yourself in FieldMate (Refer to <Document No.1>)

2) Start Device DTM

Step 6

Start FlowNavigator Program

1) Enter the license number of FlowNavigator <License Sheet No.2 >

4. Important Notice on Flow Conguration Wizard

● Supplemental explanation regarding Apply button

When you click the Apply button, the ow parameters are temporarily saved to an ofine database on your PC. To down-

load the ow parameters to the device, set “Download to Device” in the Ofine Parameter screen.

For basic information on the procedure for downloading ow parameters to the device, refer to Appendix A.

● Supplemental explanation for EJX910A/EJX930A HART 7 model

Flow parameter conguration by FlowNavigator can be done by “EJX910 V2.1” DTM.

Refer to Appendix B.